 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MICROWAVE CORPORATION v02.0604 HMC368LP4 Features Output Power: +15 dBm Wide Input Power Range: 0 to +10 dBm 100 kHz SSB Phase Noise: -140 dBc/Hz +5V @ 75 mA Supply 16 mm2 Leadless QFN SMT Package SMT GaAs PHEMT MMIC AMP-DOUBLER-AMP, 9.0 - 16.0 GHz OUTPUT Typical Applications * Microwave Radios & VSAT * Fiber Optic Infrastructure * Military Communications & Radar 11 FREQ. MULTIPLIERS - SMT Functional Diagram General Description The HMC368LP4 is a miniature amp-doubler-amp utilizing GaAs PHEMT technology in a 4 mm x 4 mm leadless surface mount package. When driven by a +2 dBm signal, the multiplier provides +15 dBm typical output power from 9 to 16 GHz. The Fo and the 3Fo isolations are 18 dB typical. The low additive SSB phase noise of -140 dBc/Hz at 100 kHz offset helps the user maintain good system noise performance. The HMC368LP4 is ideal for use in LO multiplier chains allowing reduced parts count vs. traditional approaches. Electrical Specifications, TA = +25 C, Vd1 = Vd2 = +5.0 Vdc, +2 dBm Drive Level Parameter Frequency Range, Input Frequency Range, Output Output Power Fo Isolation (with respect to output level) 3Fo Isolation (with respect to output level) Input Return Loss Output Return Loss SSB Phase Noise (Fout = 13 GHz, 100 kHz Offset) Supply Current (Idd)* *Adjust Vg1, Vg2 between -2V to 0V to achieve Idd = 75 mA typical Pin = +2 dBm 12 Min. Typ. 4.5 - 8.0 9.0 - 16.0 15 18 18 10 10 -140 75 Max. Units GHz GHz dBm dB dB dB dB dBc/Hz mA 11 - 34 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v02.0604 HMC368LP4 SMT GaAs PHEMT MMIC AMP-DOUBLER-AMP, 9.0 - 16.0 GHz OUTPUT Output Power vs. GaAs MMIC SUB-HARMONICALLY Output Power vs. Drive Level PUMPED MIXER 17 - 25 Temperature @ +2 dBm Drive Level 20 18 OUTPUT POWER (dBm) OUTPUT POWER (dBm) 16 14 12 10 8 6 4 2 0 8 9 10 11 12 13 14 15 16 17 OUTPUT FREQUENCY (GHz) +25C +85C -40C GHz 20 18 16 14 12 10 8 6 4 2 0 8 9 10 11 12 13 14 15 16 17 OUTPUT FREQUENCY (GHz) 0 dBm +2 dBm +5 dBm +10 dBm 11 FREQ. MULTIPLIERS - SMT 11 - 35 Output Power vs. Supply Voltage @ +2 dBm Drive Level 20 18 OUTPUT POWER (dBm) Isolation @ +2 dBm Drive Level 20 15 OUTPUT POWER (dBm) 10 5 0 -5 -10 -15 -20 -25 -30 Fo 2Fo 3Fo 16 14 12 10 8 6 4 2 0 8 9 10 11 12 13 14 15 16 17 OUTPUT FREQUENCY (GHz) 4.5V 5.0V 5.5V 8 9 10 11 12 13 14 15 16 17 OUTPUT FREQUENCY (GHz) Input Return Loss vs. Temperature 0 INPUT RETURN LOSS (dB) -5 -10 -15 -20 -25 -30 4 5 6 7 8 9 FREQUENCY (GHz) Output Return Loss vs. Temperature 0 OUTPUT RETURN LOSS (dB) -5 -10 -15 -20 -25 -30 8 9 10 11 12 13 14 15 16 17 FREQUENCY (GHz) +25 C +85 C -40 C +25 C +85 C -40 C For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v02.0604 HMC368LP4 SMT GaAs PHEMT MMIC AMP-DOUBLER-AMP, 9.0 - 16.0 GHz OUTPUT Output Spectrum @ Fin = 6.5 GHz, Pin = +2 dBm 20 10 0 -10 -20 -30 -40 -50 -10 4 6 8 10 12 14 16 18 20 22 24 26 28 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 7 8 9 10 FREQUENCY (GHz) INPUT POWER (dBm) OUTPUT POWER (dBm) OUTPUT POWER (dB) Output Power vs. Input Power @ Three Frequencies 20 15 10 5 0 -5 9GHz 12GHz 16GHz 11 FREQ. MULTIPLIERS - SMT SSB Phase Noise Performance, Fout = 13 GHz, Input Power = +2 dBm 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 -110 -120 -130 -140 -150 -160 -170 2 10 SSB PHASE NOISE (dBc/Hz) 10 3 10 4 10 5 10 6 10 7 OFFSET FREQUENCY (Hz) 11 - 36 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v02.0604 HMC368LP4 SMT GaAs PHEMT MMIC AMP-DOUBLER-AMP, 9.0 - 16.0 GHz OUTPUT Absolute Maximum Ratings RF Input (Vdd = +5V) Supply Voltage, Vd1, Vd2 Gate Bias Voltage (Vg1, Vg2) Channel Temperature Continuous Pdiss (T = 85 C) (derate 12.5 mW/C above 85 C) Thermal Resistance (junction to ground paddle) Storage Temperature Operating Temperature +20 dBm +6.0V -4 to 0 Vdc 150 C 812 mW Typical Supply Current vs. Vdd Vdd (V) 4.5 5.0 5.5 Idd (mA) 73 75 77 Note: Amp-Doubler-Amp will operate over full voltage range shown above. 80 C/W -65 to +150 C -40 to +85 C 11 FREQ. MULTIPLIERS - SMT Pin Locations & Outline Drawing NOTES: 1. MATERIAL PACKAGE BODY: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. 2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY 3. LEAD AND GROUND PADDLE PLATING: Sn/Pb SOLDER 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 6. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 7. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 9. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 11 - 37 MICROWAVE CORPORATION v02.0604 HMC368LP4 SMT GaAs PHEMT MMIC AMP-DOUBLER-AMP, 9.0 - 16.0 GHz OUTPUT Pin Description Pin Number 1, 5-14, 18, 19, 24 3 Function N/C Description No Connection. These pins may be connected to RF ground. Performance will not be affected. Multiplier Input. AC Coupled. No external DC blocks required. All ground leads and ground paddle must be soldered to PCB RF/DC ground. Interface Schematic RF IN 11 FREQ. MULTIPLIERS - SMT 2, 4, 15, 17 GND 16 RF OUT Multiplied Output. AC coupled. No external DC blocks necessary. 20, 22 Vd2, Vd1 Drain supply voltage 5V 0.5V. 21, 23 Vg2, Vg1 Gate supply voltages. Adjust between -2 Vdc to 0 Vdc to achieve 75 mA drain current. 11 - 38 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v02.0604 HMC368LP4 SMT GaAs PHEMT MMIC AMP-DOUBLER-AMP, 9.0 - 16.0 GHz OUTPUT Evaluation PCB 11 FREQ. MULTIPLIERS - SMT 11 - 39 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. The evaluation circuit board shown is available from Hittite upon request. List of Materials for Evaluation PCB 107846* Item J1 - J2 J3 - J7 C1 - C4 C5 - C8 U1 PCB** Description PC Mount SMA Connector DC Pin 100 pF capacitor, 0402 Pkg. 2.2 F capacitor, case size A HMC368LP4, Amp-x2-Amp 107844 PCB ** Circuit Board Material: Rogers 4350 *Reference this number when ordering complete evaluation PCB. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com |
Price & Availability of HMC368LP4
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |